OHCI Changelogs

From IEEE 1394 FireWire Wiki
(Difference between revisions)
Jump to: navigation, search
(Changes in OHCI 1.1: atomic config ROM updates)
(Changes in OHCI 1.1: link to article "1394 Open HCI 1.1: What's New")
Line 23: Line 23:
** dual-buffer mode
** dual-buffer mode
* PCI power management
* PCI power management
See also [http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/ohci1-1_new.doc Steve Bard, John Fuller, ''1394 Open HCI 1.1: What's New''. Intel Corp. and Microsoft Corp., 2000] (via [http://msdn.microsoft.com/en-us/windows/hardware/gg566938.aspx MSDN archived white papers]).

Latest revision as of 14:36, 9 December 2012

[edit] Changes in OHCI 1.1

  • InitialBandwidthAvailable, InitialChannelsAvailableHi/Lo
  • miniROM
  • BIBimageValid
  • atomic Configuration ROM updates: A write to 5.5.6 ConfigurationROMmapping is stored into a ConfigurationROMmappingNext shadow register and does not take immediate effect on ConfigurationROMmapping and the Configuration ROM physical DMA itself. At the next bus reset, the controller updates ConfigurationROMmapping by ConfigurationROMmappingNext and loads 5.5.2 ConfigROMheader and 5.5.4 BusOptions from system memory at ConfigurationROMmapping.
  • ackTardyEnable and ack_tardy interrupt
  • tag1SyncFilterLock
  • regAccessFail interrupt on register accesses when SCLK is inactive despite LPS=1
    (The spec says that controllers must not generate PCI target aborts in this case, but some do.)
  • softInterrupt
  • selfIDcomplete2
  • for all context types:
    • For stopped (run=0,active=0) contexts, CommandPtr can also point to the next descriptor, not only to the last one.
    • For running (run=1,active=1) contexts, CommandPtr is no longer unspecified but can point to either the current or to the next descriptor.
  • asynchronous transmit contexts:
    • out-of-order AT pipelining
  • isochronous transmit contexts:
    • evt_underrun is no longer possible.
    • When running (run=1,active=1), CommandPtr always points to the current descriptor.
    • Descriptors with skipAddress now have the interrupt field to get notifications for skipping.
    • On skip processing overflow, status evt_timeout.
  • isochronous receive contexts:
    • dual-buffer mode
  • PCI power management

See also Steve Bard, John Fuller, 1394 Open HCI 1.1: What's New. Intel Corp. and Microsoft Corp., 2000 (via MSDN archived white papers).

[edit] Changes in OHCI 1.2 (draft)

  • speeds higher than S400
  • betaFrame bits in descriptors and xferStatus
  • Software can clear the LPS bit.
  • physReqDebug
  • PhysicalSplitTimeout
  • asynchronous transmit contexts:
    • On a bus reset, the controller is not required to flush the AT queue.

The 1.2 revision was never finished. This list may be incomplete, and it is unknown how much of this is implemented in hardware.

Personal tools