View source for Sbp-target

From IEEE 1394 FireWire Wiki

← Sbp-target

You do not have permission to edit this page, for the following reasons:

• The action you have requested is limited to users in the group: Users.
• You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.
• Your username or IP address has been blocked. The block was made by DNSBL. The reason given is Your IP address is listed as an open proxy in the DNSBL used by IEEE 1394 FireWire Wiki..
  • Start of block: 22:03, 7 February 2023
  • Expiry of block: 22:03, 7 February 2023
  • Intended blockee: 10.30.226.114
  You can contact DNSBL or another administrator to discuss the block. You cannot use the "email this user" feature unless a valid email address is specified in your account preferences and you have not been blocked from using it. Your current IP address is 10.30.226.114, and the block ID is #. Please include all above details in any queries you make.

---

You can view and copy the source of this page:

<nowiki>Here's the series of commands I used to create a sbp2-target instance # Create a backing store for the exported filesystem This creates an 8G store # Use a path appropriate for your system dd < /dev/zero bs=1M count=8192 > /local/tmp/backing-store # Load the target core and the sbp2 interface modprobe sbp-target # Tell the target subsystem about the backing store mkdir -p /sys/kernel/config/target/core/fileio_0/sbptest echo "fd_dev_name=/local/tmp/backing-store,fd_dev_size=8589934592" > /sys/kernel/config/target/core/fileio_0/sbptest/control echo 1 > /sys/kernel/config/target/core/fileio_0/sbptest/enable # Create and enable the sbp2 target # I used the uuid of my host adapter here. You can use something different. mkdir -p /sys/kernel/config/target/sbp/00110666000000c1/tpgt_1 mkdir -p /sys/kernel/config/target/sbp/00110666000000c1/tpgt_1/lun/lun_0 ln -s /sys/kernel/config/target/core/fileio_0/sbptest /sys/kernel/config/target/sbp/00110666000000c1/tpgt_1/lun/lun_0/ echo 1 > /sys/kernel/config/target/sbp/00110666000000c1/tpgt_1/enable # On the initiator host, use dmesg to find out the device name of the target, then mkfs.ext4 /dev/sdb # Or whatever the actual device is # And mount it mount /dev/sdb /mnt/tmp </nowiki> You can find more information about the Linux target subsystem at [http://linux-iscsi.org/wiki/Main_Page the Linux iscsi site].

Return to Sbp-target.